Skip to content
Chux Electrical Services

Solar repairs and inverter replacement in Geelong

If your solar inverter is not working, showing an error code or producing less than it used to, Chux Electrical can find the fault. Our licensed team repairs solar systems across Geelong, fixes isolator and wiring faults, and replaces failed inverters, including with a battery-ready or CSIP-AUS compliant model.

Installers in hi-vis walking along the roof between rows of panels

Chux Electrical repairs solar systems and replaces inverters across Geelong, the Surf Coast and the Bellarine. We are a local team based in Breakwater, owned by Colin Norris and licensed under REC 24227. Fault-finding is charged by the hour. If the fix is a new inverter, we quote that with a fixed price before we start.

01

Common reasons a solar system stops working

Most solar faults show up in one of three ways: the inverter screen shows an error or a red light, the monitoring app shows little or no production, or your bills creep up even though nothing has changed at home. The cause can sit anywhere between the panels and the switchboard.

  • An inverter that has failed or shut itself down after a fault
  • A tripped solar circuit breaker at the switchboard
  • A faulty DC isolator, often from water getting into the enclosure
  • Damaged cabling or connectors on the roof, sometimes from pests
  • A string of panels that has stopped producing
  • A grid voltage issue that makes the inverter disconnect
  • Monitoring that has lost its wi-fi connection, so the system looks dead when it is not

02

Inverter showing an error code?

Inverters log a code when something goes wrong. Some codes clear on their own, such as a brief grid disturbance. Others point to an earth fault, an isolation fault or an internal failure that needs an electrician.

Before you call, take a photo of the screen or the app showing the code, and a photo of the label on the side of the inverter with the brand and model. That tells us a lot before we arrive. Do not open the inverter or the isolators yourself. Solar panels produce DC voltage whenever there is daylight, and it can be dangerous even when the switchboard is off.

If you need to shut the system down, follow the shutdown procedure on the label at your inverter or switchboard, then call us on 0490 503 073.

03

When solar is working, but not as well as it should

A system that is producing something can still be underperforming. The easiest check is to compare this month's production with the same month last year in your monitoring app. A big drop with no obvious reason is worth investigating.

We look at shading from trees that have grown, dirty or damaged panels, a string that is offline, inverter faults that limit output and export settings that cap what the system sends to the grid. We test on site and explain what we found and what it would take to fix it. If the system is fine and the drop is seasonal, we tell you that too.

04

Replacing an inverter

Inverters usually wear out before panels do. When one fails, replacing it is often the most practical repair. The new inverter has to suit your panels and string layout, fit the space and meet current network rules.

Powercor, the network in Geelong, says that since October 2024 new installations need an inverter on the approved inverter list that supports CSIP-AUS, the standard that lets the network manage exports over the internet. A compliant inverter with a reliable internet connection can also open up flexible exports if your site would otherwise have a zero export limit. See Powercor's flexible exports page for the details.

We install Sungrow, Fronius, Enphase, FoxESS, GoodWe and Sigenergy equipment, and we recommend the option that suits your system rather than one brand for every house.

05

Making the replacement battery-ready

If you are thinking about a battery, an inverter replacement is a good time to plan for it. A hybrid inverter can run your panels now and connect a battery later. An AC-coupled battery is the other path, and it can work alongside most existing inverters.

Solar Victoria notes that adding a battery to an existing solar system needs an amendment to the connection agreement, so the paperwork matters as much as the hardware. Our battery page and our guide to AC-coupled and DC-coupled batteries explain the options. If your switchboard is old or full, see switchboard upgrades.

06

How solar repairs are charged

Testing and fault-finding are charged by the hour, plus any parts, because we cannot price a fault until we have found it. We tell you how the charges work before we come out.

If the fix turns out to be a new inverter or a battery-ready upgrade, we quote that install with a fixed price in writing before any work starts.

On the job

  • Installers bending over to fix solar panels in place on the roof
  • Close drone view of black solar panels fixed to a corrugated roof
  • An installer crouched over a panel, tightening a fixing

What you get.

  1. 01

    Fault finding

    We test the panels, strings, isolators, cabling and inverter to find where the problem actually is, instead of guessing.

  2. 02

    Inverter error codes

    Send us a photo of the code and the inverter label. We tell you what it usually means and whether it needs a visit.

  3. 03

    Isolator and wiring repairs

    Faulty rooftop or inverter isolators, damaged cables and loose or burnt connections found and repaired safely.

  4. 04

    Underperformance checks

    If output has dropped, we compare what the system should produce with what it does, and track down the gap.

  5. 05

    Inverter replacement

    A failed inverter replaced with one that suits your panels, meets current network rules and fits your plans.

  6. 06

    Battery-ready upgrades

    If a battery is on your list, a replacement hybrid inverter can make adding one later much simpler.

Common questions

Why is my solar inverter not working?

Common causes are a tripped solar breaker, a faulty DC isolator, damaged roof cabling, a grid voltage problem or an inverter that has failed. Check the switchboard for a tripped solar breaker and note any error code. Do not open the inverter or isolators. If it does not come back, call a licensed electrician.

Do you repair solar systems you did not install?

Yes. We test and repair solar systems in Geelong whoever installed them. Send us a photo of the inverter label and any error code when you book, so we know the brand and model before we arrive. If the original installer or manufacturer warranty may cover the fault, we tell you.

Should I repair or replace my solar inverter?

It depends on the fault, the age of the inverter and whether it is still under warranty. Some faults are in the wiring or isolators, not the inverter itself. If the inverter has failed and is out of warranty, replacement is often the practical option. We test first and explain both options before you decide.

What does CSIP-AUS mean for a new inverter?

CSIP-AUS is the standard that lets the network manage solar exports over the internet. Powercor says that since October 2024 new installations need an inverter on the approved inverter list that supports CSIP-AUS. With a reliable internet connection, it can also allow flexible exports where a site would otherwise have a zero export limit.

Can I add a battery when I replace my inverter?

Yes, and it is a good time to plan for one. A hybrid inverter can run your panels now and connect a battery later, or a battery can be added at the same time. Adding one also means amending your connection agreement with the network, which we handle.

How do I know if my solar is underperforming?

Compare this month's production in your monitoring app with the same month last year. A big drop with no change in weather or shading is a warning sign. So is a string showing zero, an inverter error or bills that rise without explanation. We can test the system on site and find the cause.

Book a job with the team.

Tell us what you need. We reply within 24 hours. Solar, batteries, EV chargers and other installs get a free on-site quote with a fixed price in writing; repairs and fault-finding are charged by the hour.

Or call us

0490 503 073

Step 1 of 3: The job

What do you need?
Where is the job?
How do we reach you?

Install quotes are free, on site, no obligation. Repairs are charged hourly. We reply within 24 hours.