Skip to content
Chux Electrical Services

Heat pump hot water installation in Geelong

A heat pump hot water system uses far less electricity than an old electric storage tank, and it pairs well with solar. We quote the swap ourselves, our own plumber and electricians do the work, and we explain your options plainly.

A Chux installer standing on the roof beside new solar panels

Chux Electrical installs heat pump hot water systems across Geelong, the Surf Coast and the Bellarine. We are a local team based in Breakwater, owned by Colin Norris and licensed under REC 24227. The person who quotes your job does the work, with no subcontractors, and every quote is free, on site and a fixed price in writing.

01

How a heat pump hot water system works

A heat pump works like a fridge in reverse. It pulls heat from the surrounding air and transfers it into the water in the tank. Because it moves heat instead of making it from scratch, it uses much less electricity than a standard electric element.

As a rule of thumb, heat pumps commonly deliver several times more heat energy than the electrical energy they use. That is why running costs are usually much lower than an old electric storage unit.

The unit sits outdoors or in a well-ventilated space, and it makes a low humming sound a bit like a small air conditioner. Placement matters, and we talk it through with you.

02

Replacing an old electric or gas storage unit

If you have an old electric storage tank, you probably have one of the more expensive ways of heating water. A heat pump can cut the electricity used for hot water substantially.

If you have a gas storage unit, switching to a heat pump takes one more appliance off gas. This is attractive if you are moving the whole house to electric, or if you have solar and want to use it for hot water as well.

Replacement works best if you plan it before the old system fails. A planned swap means you choose the unit, the timing and the price. An emergency swap on a cold morning gives you far fewer options.

03

Running your heat pump on solar

If you have solar panels, hot water is one of the best uses for the midday surplus. Instead of exporting extra power for a low feed-in rate, you store it as hot water.

Many heat pumps have built-in timers. We set the unit to heat during the sunniest hours, so most of the energy comes from your own panels. Some systems can also be connected to a controller that responds to solar production.

If you do not have solar yet, a heat pump is still a good step. And if you add solar later, the timer is easy to change. We install solar too, so we can plan hot water as part of the whole system.

04

Rebates and eligibility

The Victorian Government says households can save up to $1,560 on an efficient hot water system: a Victorian Energy Upgrades discount of up to $560, plus a Solar Homes hot water rebate of up to $1,000, or up to $1,400 for eligible locally made products (energy.vic.gov.au, checked 31 October 2026).

The Solar Homes rebate is for owner-occupiers with a combined taxable income under $150,000, on a property worth under $3 million, replacing a system at least three years old. Check the current rules at solar.vic.gov.au before you commit, as programs can change. Ask us during the quote and we will point you in the right direction.

05

Gas hot water from 1 March 2027

From 1 March 2027, gas hot water systems generally cannot be installed in Victoria, with a few exceptions. If a gas system breaks and cannot be repaired, or needs replacing for any other reason, the replacement must be electric, such as a heat pump. A working gas system can stay, and gas heating and cooktops are not affected. If yours is getting old, planning the swap now beats a rushed replacement on a cold morning.

06

Is a heat pump right for your home?

Heat pumps suit most homes, but not every spot. They need airflow, space and a spot that is not too close to bedrooms because of the noise. Very tight courtyards can be a challenge.

Household size matters too. We help you choose a tank size that fits the number of people at home and how much hot water you use, so you are not paying to heat water you never need.

07

What affects the cost

The price depends on the heat pump you choose and its tank size, the position of the unit, plumbing changes, switchboard capacity and whether you are replacing electric or gas.

We quote free on site and the price is fixed before work starts. Rebate eligibility is separate, so check solar.vic.gov.au for current details.

On the job

  • Two installers on the roof, one in a hi-vis safety harness
  • A Chux team member in a cap with arms crossed in front of a Chux van
  • The edge of a new solar array and its frame against the sky

What you get.

  1. 01

    Site assessment

    We check where the unit will go, airflow, access, drainage and the existing electrical supply.

  2. 02

    Removal of the old unit

    Your old electric or gas storage hot water system disconnected, removed and taken away.

  3. 03

    Heat pump install

    A new heat pump hot water system supplied and installed, with the plumbing handled by a licensed plumber.

  4. 04

    Electrical connection

    A correctly sized circuit and protection, with switchboard work if your board needs it.

  5. 05

    Timer and solar setup

    Heating timed for daylight hours so the unit runs on your solar when the panels are producing.

  6. 06

    Testing and handover

    Full testing, the Certificate of Electrical Safety and a walk-through of how your system works.

Common questions

How does a heat pump hot water system work?

It extracts heat from the air outside and uses it to heat the water in the tank, much like a fridge works in reverse. Because it moves heat instead of creating it, it uses a lot less electricity than a standard electric element.

Is a heat pump cheaper to run than electric hot water?

In most cases, yes. A heat pump uses much less electricity to heat the same amount of water. The saving depends on your household size, your electricity rate and whether you run it on solar. We can talk through your situation at the quote.

Can I run a heat pump on solar?

Yes. Set the timer to heat during the day and the unit uses your solar power instead of grid power. It turns spare midday solar into stored hot water, which is often better than exporting it for a low feed-in rate.

Are there rebates for heat pump hot water in Victoria?

Yes. A Victorian Energy Upgrades discount of up to $560, plus a Solar Homes hot water rebate of up to $1,000 for eligible owner-occupiers, or up to $1,400 for eligible locally made products. Income and property conditions apply, so check solar.vic.gov.au for the current rules before you buy.

Can I still install gas hot water in Victoria?

Mostly not, from 1 March 2027. From that date a gas hot water system that needs replacing must generally be replaced with an electric one, such as a heat pump, with a few exceptions set by the Victorian Government. A working gas system can stay and be repaired.

Are heat pump hot water systems noisy?

They make a low hum, similar to a small air conditioner outdoors. Placement is the key. We recommend a spot away from bedrooms and neighbours' windows where possible, with enough airflow for the unit to work well.

Can you replace my gas hot water with a heat pump?

Yes. We disconnect and remove the old unit, install the heat pump with a licensed plumber handling the water connections, and do the electrical work. If your switchboard needs upgrading to support it, we include that in the quote.

My gas hot water has died. Can I replace it with gas after 1 March 2027?

Usually not. The Victorian Government says that from 1 March 2027 a gas hot water system that breaks and cannot be repaired must be replaced with an electric option. There are exceptions, such as apartments with centralised hot water, or where an electric unit would need a switchboard upgrade for non-safety reasons. Check energy.vic.gov.au for the full rules.

Get a free on-site quote.

Tell us what you need. We reply within 24 hours. Solar, batteries, EV chargers and other installs get a free on-site quote with a fixed price in writing; repairs and fault-finding are charged by the hour.

Or call us

0490 503 073

Step 1 of 3: The job

What do you need?
Where is the job?
How do we reach you?

Install quotes are free, on site, no obligation. Repairs are charged hourly. We reply within 24 hours.