Skip to content
Chux Electrical Services

Rental electrical safety checks in Geelong

Victorian rental providers must have a licensed or registered electrician check the electrical installation at least every two years. Chux Electrical carries out rental electrical safety checks across Geelong for landlords and property managers, gives you the written record you need to keep, and can fix any faults or missing safety switches we find.

A Chux team member in a cap and beard in front of a Chux van

Chux Electrical does electrical safety checks for rental properties across Geelong, the Surf Coast and the Bellarine. We are a local team based in Breakwater, owned by Colin Norris and licensed under REC 24227. Checks and small repairs are charged by the hour. We give you the paperwork and tell you plainly what needs fixing.

01

What the law requires of rental providers

Consumer Affairs Victoria says rental providers must have all electrical installations, fixtures and fittings checked by a licensed or registered electrician every two years. If a check has not been done in the two years before a renter moves in, it must be done as soon as possible.

Before a rental agreement is signed, the rental provider must tell the renter the date of the last electrical safety check and any outstanding recommendations. The check follows section 4 of AS/NZS 3019, the Australian Standard for periodic assessment of electrical installations. Read the full rules on the Consumer Affairs Victoria website, or in our landlord checklist.

02

Safety switches in rental homes

Since 29 March 2023, all power outlets and lighting circuits in a Victorian rental must be connected to a switchboard-type circuit breaker and a switchboard-type safety switch (RCD). A safety switch cuts the power in a fraction of a second if current leaks to earth, for example through a person.

If the switchboard already has circuit breakers, we can usually add safety switches to the power and lighting circuits. An older board with ceramic fuses often cannot take them, and then the board needs replacing. See our switchboard upgrades page for what that involves.

Energy Safe Victoria recommends testing safety switches every three months by pressing the test button. It is worth passing that on to your renters.

03

What the check covers

We look over the installation and test it to the standard. The aim is to find anything unsafe before it hurts someone or damages the property.

  • The switchboard, its protection devices and labelling
  • Safety switch operation on power and lighting circuits
  • Powerpoints, switches and light fittings for damage or overheating
  • Visible wiring and cables for damage or deterioration
  • Fixed appliances such as the oven, cooktop and hot water connection
  • Outdoor and wet-area fittings, where faults are more common

04

The record you need to keep

After the check, you need a record of it. Consumer Affairs Victoria says it should include the name of the electrician and their licence or registration number, the date of the check, the results and any repairs, along with a report under section 2 of AS/NZS 3019.

We give you that record after every check. Keep the latest one on file, along with any invoices for repairs, and give the renter a copy within 7 days if they ask for it in writing.

05

Getting ahead of the 1 March 2027 standards

New minimum energy efficiency standards for Victorian rentals start in phases from 1 March 2027. When a rental's hot water system fails and cannot be repaired, it must be replaced with an efficient electric option such as a heat pump. Similar rules apply to heating, and cooling is required in the main living area at the start of a new rental agreement.

Planning these upgrades is easier than an emergency swap with a renter waiting for hot water. We can look at where a heat pump would go and whether the switchboard has room for new circuits during the safety check. See our heat pump hot water page and the Consumer Affairs Victoria standards page.

06

How rental checks are charged

Rental safety checks and any small repairs are charged by the hour, plus parts. The time depends on the size of the property and what we find. Bigger work, such as a switchboard upgrade, is quoted separately before we start.

On the job

  • A Chux team member in a cap with arms crossed, smiling
  • A Chux team member standing in front of a Chux van
  • Looking down from the roof at the crew sorting gear and boxes in the car park

What you get.

  1. 01

    The two-yearly safety check

    A check of the electrical installation, fixtures and fittings, following section 4 of AS/NZS 3019 as Consumer Affairs Victoria requires.

  2. 02

    Safety switch check

    We confirm power outlets and lighting circuits are on circuit breakers and safety switches (RCDs), and test that the safety switches trip.

  3. 03

    A written record

    Our name and licence number, the date, the results and any repairs, so you have the record to keep and share with renters.

  4. 04

    Repairs and upgrades

    If something fails, we can fix it. Small repairs are charged by the hour; bigger work, such as replacing an old fuse board, is quoted first.

  5. 05

    Working with property managers

    We arrange access with the agent and the renter, and send the record and any recommendations back to whoever manages the property.

  6. 06

    Planning for March 2027

    While we are there, we can look at the hot water and heating ahead of the new minimum energy efficiency standards.

Common questions

How often does a rental property need an electrical safety check in Victoria?

At least every two years, by a licensed or registered electrician. Consumer Affairs Victoria says that if a check has not been done in the two years before a renter moves in, it must be done as soon as possible. We can book the check and give you the written record.

Who can do a rental electrical safety check?

Consumer Affairs Victoria says the check must be done by a licensed or registered electrician. Chux Electrical holds Registered Electrical Contractor licence REC 24227 and carries out rental electrical safety checks across Geelong, following section 4 of AS/NZS 3019, with a written record for the rental provider.

Do Victorian rental properties need safety switches?

Yes. Since 29 March 2023, all power outlets and lighting circuits in a rental must be connected to a switchboard-type circuit breaker and safety switch. If your board already has circuit breakers, safety switches can usually be added. An old fuse board may need replacing.

What do I have to tell my renter about the electrical check?

Before a rental agreement is signed, Consumer Affairs Victoria says you must tell the renter the date of the last electrical safety check and any outstanding recommendations. Keep the record of the latest check, and give the renter a copy if they ask for it in writing.

What happens if the check finds a problem?

We explain what we found, how urgent it is and what it would take to fix. Anything dangerous is made safe straight away. Small repairs, such as replacing a damaged fitting, are charged by the hour. Bigger work, such as adding safety switches or a new board, is quoted first, and we arrange a time with you or your property manager.

Does a rental's hot water have to be replaced in 2027?

Not if it is working. From 1 March 2027, when a rental's hot water system fails and cannot be repaired, it must be replaced with an efficient electric option such as a heat pump. A system in good working order can stay. We can plan the change before it fails.

Book a job with the team.

Tell us what you need. We reply within 24 hours. Solar, batteries, EV chargers and other installs get a free on-site quote with a fixed price in writing; repairs and fault-finding are charged by the hour.

Or call us

0490 503 073

Step 1 of 3: The job

What do you need?
Where is the job?
How do we reach you?

Install quotes are free, on site, no obligation. Repairs are charged hourly. We reply within 24 hours.