Skip to content
Chux Electrical Services

Do you need a switchboard upgrade for solar, a battery or an EV charger?

Often, in older homes. Solar, a battery and an EV charger all need space for new circuit breakers and a board in safe, modern condition. Old ceramic fuse boards usually have to be upgraded to circuit breakers and safety switches first. We check your board on the free site visit. If it needs an upgrade, we quote that separately, so you see its cost on its own.

By the Chux Electrical team. Updated 11 November 2026. 2 min read.

A Chux electrician wiring an enclosure on an outside wall

01

Why the switchboard matters

Everything you add connects through your switchboard. Solar needs its own protected circuit. A battery needs one too. An EV charger is a big, long-running load that should have its own dedicated circuit. If the board is full, old or unsafe, it has to be dealt with first.

02

What we look for

  • Spare space for new breakers.
  • Ceramic fuses or old wiring.
  • Safety switches protecting your circuits.
  • The main switch rating, and whether your supply is single-phase or three-phase.
  • Signs of heat damage, corrosion or past DIY work.
An installer in hi-vis crouched on the roof, fixing a panel with a drill

03

Older homes

Some older Geelong homes, in suburbs such as Highton, still have ceramic-fuse switchboards. These usually need upgrading to modern circuit breakers and safety switches before solar or a battery can be connected. We do that work ourselves and explain what is needed and why.

04

What an upgrade involves

A licensed electrician replaces the board with a modern one, fits circuit breakers and safety switches, tidies the wiring and tests the result. It is regulated work in Victoria and has to be done by a licensed electrician. See our switchboard upgrades page for more.

05

What it costs

Switchboard work depends on the size of the board and what is behind it, so we look at it on site and quote the upgrade separately, in writing, before any work starts. Fault work, such as a safety switch that trips at random, is charged by the hour.

Sources

Where this comes from.

Rules and amounts change, sometimes with little notice. This guide was last checked on 11 November 2026. Always check the official source before you sign.

Common questions

Can I add solar with an old switchboard?

Often not as it stands. Ceramic fuses and no safety switches usually mean the board needs upgrading to modern circuit breakers and safety switches first, and we confirm on the free site visit.

Do I need a new switchboard for an EV charger?

Not always. A charger needs its own circuit and enough spare capacity. A healthy board with space is often fine, and an old or full one needs work first. We check at the quote, and any board work is quoted separately, in writing.

Who can upgrade a switchboard?

Only a licensed electrician. It is regulated work in Victoria, and you should expect a Certificate of Electrical Safety when it is done.

Get a free on-site quote.

Tell us what you need. We reply within 24 hours. Solar, batteries, EV chargers and other installs get a free on-site quote with a fixed price in writing; repairs and fault-finding are charged by the hour.

Or call us

0490 503 073

Step 1 of 3: The job

What do you need?
Where is the job?
How do we reach you?

Install quotes are free, on site, no obligation. Repairs are charged hourly. We reply within 24 hours.