Skip to content
Chux Electrical Services

Why does my safety switch keep tripping?

A safety switch trips when it detects electricity leaking where it should not, usually from a faulty appliance, a damaged cable or moisture. Unplug everything on that circuit, reset the switch once, then plug items back in one at a time. If it trips again or will not reset, stop and call a licensed electrician. Never bypass a safety switch.

By the Chux Electrical team. Updated 31 October 2026. 3 min read.

A Chux team member in uniform in front of a Chux van

01

What a safety switch does

A safety switch, also called an RCD, watches the electricity going out and coming back on a circuit. If some of it is leaking to earth, for example through a person, it cuts the power in a fraction of a second. It is there to prevent electric shock.

02

The usual causes

  • A faulty appliance, often one with a damaged cord or a failing element.
  • Moisture in an outdoor powerpoint, light or garden fitting, especially after rain.
  • A damaged or chewed cable.
  • Old or deteriorating wiring.
  • A fault in the switchboard or the safety switch itself.
A Chux installer crouched on the roof using a drill on a panel

03

What you can safely try

These steps are safe for most people. Stop if anything seems unsafe.

  • Unplug everything on the circuit that tripped.
  • Reset the safety switch once.
  • Plug appliances back in one at a time, and note which one trips it.
  • Leave that appliance unplugged and have it repaired or replaced.

04

When to stop and call an electrician

Call a licensed electrician if the switch trips again with nothing plugged in, will not reset, or trips repeatedly. If there is a burning smell, visible damage, sparks or anyone has had a shock, switch off at the main switch if it is safe to do so and call us on the number below or, in an emergency, 000. See our emergency electrician page.

05

Test it every three months

Energy Safe Victoria recommends testing each safety switch every three months. Tell everyone at home first, then press the test button on each safety switch: it should cut the power and flip to off. Reset it, and if a switch does not trip when tested, call a licensed electrician straight away. Energy Safe Victoria also suggests getting the wiring checked in a house more than 30 years old.

06

What we do

We trace which circuit and which part of it is causing the leakage, fix the cause, and test the circuit before we leave. If the switchboard itself is old, we explain whether it is worth upgrading.

Sources

Where this comes from.

Rules and amounts change, sometimes with little notice. This guide was last checked on 31 October 2026. Always check the official source before you sign.

Common questions

Is it safe to keep resetting a safety switch?

Reset it once to test. If it trips again, something is wrong, and repeated resetting can be unsafe. Call a licensed electrician.

Can a storm make a safety switch trip?

Yes. Rain and moisture can cause leakage and trip a safety switch. If it keeps happening after the weather clears, get it checked.

How often should I test my safety switch?

Every three months, according to Energy Safe Victoria. Press the test button on each safety switch. If it does not trip, call a licensed electrician.

Can I bypass a safety switch that keeps tripping?

No. A safety switch is there to prevent electric shock. Bypassing it is dangerous and against the rules. Find and fix the cause instead.

Get a free on-site quote.

Tell us what you need. We reply within 24 hours. Solar, batteries, EV chargers and other installs get a free on-site quote with a fixed price in writing; repairs and fault-finding are charged by the hour.

Or call us

0490 503 073

Step 1 of 3: The job

What do you need?
Where is the job?
How do we reach you?

Install quotes are free, on site, no obligation. Repairs are charged hourly. We reply within 24 hours.